|FOREDOM WORK BENCH SYSTEM
Multi Handpiece Arm
The Multi Handpiece Arm is perfect for storing your non-duplex spring handpieces. There are 6 stepped pegs that are 3/4" tall. Just stand up your Foredom handpiece with the quick disconnect end on a peg.
The Multi Handpiece Arm is part of the Foredom Work Bench System. It is deigned to fit onto the MAMH-13 Double Motor Hanger. It will also fit onto the MAAM-S Short Support Rod and the MAAM-L Long Support Rod. These are non-motor hanger rods that allow you to build a Work Bench System without a motor hanger.
The Multi Handpiece Arm is held in place on the Support Rods by a heavy metal clamp and set screw. This means you can position the arm almost any where allow the support rod. Once the arm is locked into place, 5 position ratchet hinge allows you to swing the arm 180deg horizontally to keep your accessories within reach or out of the way when not needed.
All of the accessory arms of the Foredom Work Bench System are 12" in length for uniformity and ease of use.