|FOREDOM WORK BENCH SYSTEM
Peg Holder Arm with 10 Pegs
This arm features 5 angled, stainless steel along each side and a non-scratch felt along the upper surface. The pegs can securely hold grinding wheels, larger radial discs, and other polishing wheels with at least a 3/8" arbor hole. you could even hang saw frames, handpieces and other tools. the felt upper edge is ideal for holding pliers and tweezers.
The Peg Holder Arm is part of the Foredom Work Bench System. It is deigned to fit onto the MAMH-13 Double Motor Hanger. It will also fit onto theMAAM-S Short Support Rod and the MAAM-L Long Support Rod. These are non-motor hanger rods that allow you to build a Work Bench System without a motor hanger.
The Peg Holder Arm is held in place on the Support Rods by a heavy metal clamp and set screw. This means you can position the arm almost any where allow the support rod. Once the arm is locked into place, 5 position ratchet hinge allows you to swing the arm 180deg horizontally to keep your accessories within reach or out of the way when not needed.
All of the accessory arms of the Foredom Work Bench System are 12" in length for uniformity and ease of use.
- Model MAAH-P
- 12" long x 4" wide x 1-1/2" high (30 x 10.2 x 3.7cm)
- Pegs are 1-1/2" long x 5/16" diameter (3.7cm x 0.8cm)