Article number: | HO540 |
Availability: | In stock |
FOREDOM DP-30 DRILL PRESS
This rugged stand turns your flexshaft into a drill press with a stroke length up to 1-1/4". The adjustable table slides up or down or can be rotated out of the way for drilling larger items.
The DP-30 stand consists of a metal base with 4 mounting holes that allow it to be bolted to your bench or work table top for stability. A steel rod affixed to the base is what supports the moveable work surface and handpiece holder. Both the work surface and handpiece holder can be moved up and down or rotated on the support rod and are held in place by hand-tightening large, friction knobs.
The handpiece holder has two holes, 1" in diameter for securing your Foredom #30 or #44 handpiece. Other brands of handpieces will work as long as they have a diameter of 1". Tightening two Allen screws "locks" the handpiece in place.
An analog depth gauge on the side of the handpiece holder lets you set a maximum drilling depth by raising or lowering screw wheels. The gauge is in in inches.
For use with #30, #30H, #44, #44H, #44T Foredom handpieces.
(flexshaft and handpiece not included).