DER052 = Easy Earring Double Post Punch for Cards

Turn your business cards in earring cards with the Easy Earring Double Post Punch

This punch can be used with post earrings, fish hook earrings, french wires, and also displaying single beads or pendants -- simply place wire through holes and twist in the back of the card!

The Double Post Punch punches approximately 3/4" from edge of paper. The holes are approximately 1" apart. The hole diameter is 1/16".

This punch was designed by a jewelry designer for all jewelry designers.

You can: create your own brand, turn business cards into earring cards, Save money on earring display cards. Always have the ability to create your own earring cards.

**Please note that this punch is designed for use on one business card at a time. Multiple cards are too thick.**

Handy Tips to achieve better results:

1) Works great with most business cards- use max 100lb or less non-coated cardstock
2) Punch one card at a time.
3) Allow punch to rest after punching 20-25 cards, if punching a large batch (cutting area can swell from heat friction).
4) Occasionally punch through folded aluminum foil to sharpen punch.
5) Punch through waxed paper a few times for smoother cutting.
6) Use earring backs or French wire keepers to keep earrings on card during transport.