Economical Disc Cutter 1/8" to 1-1/4" - Ten Punches
Cut perfect circles every time!
This small, economical disc cutter features 10 punches ranging in size from 1/8" up to 1-1/4". The tool's holes have been drilled, reamed and honed to make fine, clean cutters. The punches are oil-quenched tool steel that have been drawn for hardness and durability. The base is case-hardened and ground. You can cut soft sheet (brass, copper, silver) up to 20ga.
The tool measures about 5-1/2" in diameter and 3" high.
Punch sizes include: 1/8", 1/4", 3/8", 1/2", 5/8", 3/4", 7/8", 1", 1-1/8" and 1-1/4".
This disc cutter features lever-style separating device. You can use this to quickly separate the upper section from the lower section to help remove punches that might become stuck in the cut metal. Rotating the lever, unscrews the two halves and parts them with the help of springs.
We recommend using a brass mallet (1lb. to 2lb. preferred) to prevent damage to your disc cutter. You should also use bur & tool lube to reduce friction and wear on the the punches.