||Out of stock
This fine, reusable clay is ideal for casting small, detailed pieces.
Pack one half of the aluminum ring mold with Delft clay
Press your original model into the clay
Dust the mold with #22.645 parting powder (not included) to ease release of the model
Place the other half of the ring on the first one and fill with clay
Tap firmly with a rubber mallet to firm it around the model
Open the mold and remove the model
To cast, cut a sprue channel through the clay and pour in molten metal.
Within minutes, the original is finished with little finishing required
The Delft Clay Casting System includes a 4.4lb (2Kg) bag of reusable Delft Clay, a 60mm (2.35") round aluminum casting ring, and an instruction sheet.