||Out of stock
Now you can have an affordable, easy-to-use, all-in-one propane torch for your shop or studio. Whether you want an economical way to get into soldering or you need a portable but effective torch, the Handy Flame II is for you. It's ready to go!
The Handy Flame II comes complete. No assembly required. Just connect it to your disposable propane (or MAPP) tank.
No assembly required (torch handle, hose and on/off valve all in one)
Use with propane or MAPP disposable fuel tanks (no oxygen tank needed)
Automatic one touch piezo-electric ignition
Efficient, swirl flame tip for maximum heat output
Comfortable, ergonomic grip (overall torch handle length is 12")
5ft fuel hose with brass fittings connecting the torch
Use with disposable tanks only
To connect the torch to fuel cylinder, hand tighten the body of the on/off valve keeping the threads properly aligned. Check for leakage in the connection between the torch and the fuel cylinder.
Lighting the Torch
Turn the on/off valve knob counter-clockwise slowly while pushing the igniting trigger until the torch ignites.
Adjust the flame size by turning the on/off valve. Clockwise decreases the flame and counter-clockwise increases the flame.
DO NOT open the on/off valve all the way before lighting. The force of the fuel exiting will prevent ignition; essentially blowing out the flame.
Turning Off the Torch
Turn the on/off valve knob clockwise until the flame goes out and the torch is fully turned off.
After use, turn the on/off valve knob to the closed position and unscrew the torch from the fuel cylinder.
Make sure the torch is completely cool before storing.