|NEW AND IMPROVED PEPE JUMP RING MAKER!
The New and Improved Jump Ring Maker JRM2 may not cost six million dollars, but it sure feels like it does. It allows the you to make jump rings by using the hand winding Jacobs chuck and cutting with a Jacobs style hand piece on a flexible shaft motor. A keyless Jacobs style chuck for holding the mandrels is also provided in the set.
Now made in the USA, the New Jump Ring Maker features a coil holder that has a thicker top plate with easy-to-use thumbscrews. The new winding attachment can be mounted on its stand or anywhere on your bench.
There are 20 inner core nickel plated winding rods range form 2.5 mm to 12.5mm in diameter (in 0.5mm increments) . Each mandrel (except the 4 smallest) have a "pilot" hold for holding the wire in place. The coiled wire holder is designed for cutting the wire with a separate cutting disc using a flexible shaft tool. All accessories are attractively placed on a heavy duty, plastic formed base (measuring approximately 8-1/4"x4") for easy placement and storage.
|The Jump Ring Maker comes with one, 31.75mm dia. cutting blade which will cut wire up to 18ga (1.02mm) and a tube of saw blade lubricant.
* Please note: The Jump Ring Maker does NOT include mounting screws *
A large blade (38mm dia.) is also available for cutting wire up to 6ga. (4.12mm).
Please note that a flexible shaft machine with a #30 style handpiece is required for the PEPE Jump Ring Maker to work.
* The handpiece holder for the PEPE Tools Jump Ring Maker was designed to precisely fit the Foredom brand of #30 handpiece. There is the possibility that other brands may be a bit snug and need a little effort to slide into place *
|Pepetools Jump Ring Maker "JRM2"