Steel Riveting Block by Eugenia Chan
Eugenia-C Steel Riveting Block. This handy steel block is only 2-5/8" x 1-1/2" and 3/8" thick. It was designed by artist Eugenia Chan to make riveting in cold connections easier, quicker and cleaner.
No more guessing on the length of wire to be cut. Use the holes at the top (A) to pre-cut the perfect length of wire needed for your riveting projects.Wire can also be cut by using the middle row of holes (B) which are about 1.8mm deep so every cut is jus the right amount of wire needed to create a "head" on both sides.The dimples on the left side (C) are used for support when riveting in order to hold the shape of the rounded rivet head.The circles on the right side (D) are for riveting eyelets in three different sizes without flattening the rounded rims.On both sides of the block (E), there are holes, dimples and circles for curved surfaces.
Mount the block in a vise to use these features.