TS2013 = Kee Gold & Platinum Tester TS2013 = Kee Gold & Platinum Tester TS2013 = Kee Gold & Platinum Tester TS2013 = Kee Gold & Platinum Tester TS2013 = Kee Gold & Platinum Tester TS2013 = Kee Gold & Platinum Tester
TS2013 = Kee Gold & Platinum Tester TS2013 = Kee Gold & Platinum Tester TS2013 = Kee Gold & Platinum Tester TS2013 = Kee Gold & Platinum Tester TS2013 = Kee Gold & Platinum Tester TS2013 = Kee Gold & Platinum Tester

TS2013 = Kee Gold & Platinum Tester

$399.00 $325.00
+ -
Add to cart
Article number: TS2013
Availability: In stock

KEE GOLD TESTER
Model M-509GM

The KEE GOLD TESTER Model M-509GM is a revolutionary, affordable and "user friendly" gold/platinum purity analyzer. This meter is a quick and easy nondestructive way to test gold and platinum.

It tests gold alloys from 10K to 22-24K in all gold colors without having to push a color button or use any messy gels or dangerous chemicals.

The easy to read analog meter movement allows each individual user, after calibration, to become very efficient and comfortable testing gold on his/her meter.

Size: 6.5" x 3.25" x 1.75" (165 x 83 x 45mm)
Weight: 12 oz
Power: 1 AA battery (170hrs+ continuous use)



Kee Gold Analyzer Instructions:

Always!
1) Turn Kee Gold Analyzer (KGA) off when not in use (battery will die)
2) Keep Cap snapped on Wand when not in use (Wand will dry out)

Basic Instructions:
1. Turn KGA on
2. Remove Cap from Wand
3. Calibrate KGA with known piece of 18K, set meter to center of white zone.
4. Test items
5. Replace Cap to Wand and Turn KGA off when done.

Changing the battery:
1. Turn KGA off and remove testing wand and wires.
2. Remove protective rubber cover.
3. Remove the two Phillips screws.
4. Gently pull KGA apart
5. Replace the one AA Battery with a fresh one, reassemble

Things to Know:
"US Patented"
*KGA works best at room temperature.
*Replacement Wands available.


Frequently asked questions

How do I calibrate my meter?
Calibrating your meter is easy. All you need to do is test a piece of known 18k gold, and while testing, turn the adjusting knob until the meter needle is centered in the white 18k zone.

Why won’t my meter calibrate to 18k anymore?
When your meter will not calibrate to 18k, it normally means the battery needs to be replaced. Please follow the directions for “replacing battery” in the Q&A section. It can also mean the probe needs replaced this will depend on usage and probe care. Always replace battery first. (Note: If the probe is left with cap off, this will greatly reduce the life of the probe.)

How do I change the battery?
First remove the black rubber protective case from the meter body. Remove the 2 phillips head screws from the back of the case. Replace the single AA battery and reassemble. (Note: because of the unique operating system of this meter, use only new, fully charged batteries!)

How Long will my testing probe last?
This all depends on use. We expect the test probe to last several months. If the meter is only used occasionally, the life span will be increased. Leaving the cap loose or off will greatly reduce the life of the probe.

Why is this meter analog instead of digital?
Although digital is the latest technology, it is not always suitable for all conditions and jobs. Because of the delicate nature and variables of testing gold, we at KEE Gold decided that a quality analog meter movement is a better fit for this job. Analog movements show all the different variables that can be found testing gold and gold plate. This gives the user an easy to see needle, that can become very quick to read and understand.

0 stars based on 0 reviews
Add to wishlist / Add to comparison

FDJTool.com

  • Just minutes from downtown Orlando, FL
  • 407-629-6906
  • sales@fdjtool.com
Copyright 2018 FDJ Tool
PayPal Credit Card