||PM9001 Gold finish
||Out of stock
Jax Gold Finish produces a simulated 24K gold finish on brass. Unlike tinted lacquer, Jax can be applied in layers until the desired shade of gold is reached.
Sold in a 2 fl oz bottle.
Metal must be clean and free of lacquer, oil, grease or wax. To apply, either brush solution on with a bristle brush or dip entire object in solution. Leave in solution for time necessary to achieve results (60 seconds- 20 minutes). Check color on metal frequently. Rinse with cold water and dry. Keep used solution separate from fresh. Be careful not to contaminate the solution with steel wool or other metal particles.
Note: The gold color will develop over time. Try a coat or 2 of the finish and then rinse and wait a few hours to see if you need to use another coat of the gold finish.
We recommend using Ultra Polishing Pads to remove all tarnish first, then wiping your metal down with alcohol to remove any oils. Please note this item will only work on brass, bronze, sterling silver, or aluminum (not copper or plated items).
Jax Chemicals in 2 oz bottles may be shipped without hazardous shipping charges.
Jax Chemicals should also be used with care by experienced crafts people. Please read and follow directions and cautions. Keep out of the reach of children.