||Out of stock
FRETZ BT-11 SEAMLESS BRASS BRACELET CUFF 2-1/4" x 3-1/2"
This 20ga (0.8mm thick) seamless, brass tube form cuff is 2-1/4" (57mm) in diameter and 3-1/2" (89mm) wide. It is perfect as basic forms for many of the projects shown in the Hammering and Forming DVDs by Bill Fretz.
Bill Fretz uses extruded brass alloy tubing made from 70% copper and 30% zinc. After the seamless tubing is cut, the edges are cleaned on a belt sander. The blanks are then annealed and tumbled to a basic finish.
The 2" diameter cuffs when cut will work great for smaller wrists while the 2-1/4" work better on larger ones.