|
ECONOMICAL DISC CUTTER and DOMING SET with 21 PUNCHES
Item# DA2599
This economical set not only cuts flat discs, but it also forms and cuts cone and dome shaped discs. It comes with a small disc cutter and 21 punches (7 flat, 7 concave, 7 convex) all nicely packed in a wood storage box.
Domed discs are formed by using the convex and concave punches with the disc cutter.
Cuts 7 sizes: 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8". A great way to expand your design options.
|
|
Importance of Using a Brass Hammer
When using a disc cutter (or design punches or other steel tools), you should avoid using a jeweler's hammer, ball peen hammer, household hammer or any other steel hammer. Using them can be dangerous.
Steel hammers are hardened. When you strike a steel tool, there is a great possibility that the impact can cause one or both of the tools to crack or shatter. This will damage the tool and can send shards of metal flying.
A brass hammer is softer than the steel tool you will strike. Because of this, the tools won't be damaged. Yes, the brass hammer will get marred (it is supposed to) and brass can "rub off" on the struck end of the tool, but this is a small price for safety and keeping your tools in good condition.
Hint:
It should not take more than one blow to punch out a disc. If it does, you are not hitting the disc cutter hard enough. One clean blow will give you a crisp, sharp disc. Multi blows can cause uneven edges, deformation, flaring and other problems. |
Introduction to Disc Cutters
| |
- Brand / Manufacturer : Eurotool
- Country of Origin : Unknown
- Manufacturer's Part Number : DAP-430.00
Volume Discounts
|
1
|
$64.95
|
EACH
| |
|
2
|
$63.95
|
EACH
| |
|
5
|
$60.95
|
EACH
| |
|